Application:
Applied for soft heteromorphic conductor, single layer continuous center taping, suitable for PTFE, polyimide, etc special high temperature-resistant material, equip with online spark testing, traversed take up at one time.
Technical Parameters:
| Model | Small type vertical conductor taping machine | Vertical Conductor Taping Machine |
| Anisotropic conductor specification | 5 × 5mm | 10 × 10mm |
| Tape material | PTFE,polyimide, etc . | |
| Taping RPM | 1800(r/min) | 1500(r/min) |
| Line speed | 1-15m/min | 1-30m/min |
| Machine power | 1HP Servo motor speed regulation,linkage with capstan motor . | 2HP Servo motor speed regulation,linkage with capstan motor . |
| Taping tension | Microhysteresis tension type , keep constant from full bobbin to empty bobbin . | Hysteresis type , keep constant from full bobbin to empty bobbin . |
| Capstan type | Cladding plastic wheel type with anti-skid and wear resistance | |
| Spark detection | 10KV | 10KV |
| Pay off | Adjustable magnetic powder tension type | |
| Take up | Traverse type automatic constant tension take up,no torsion or push/pull damage in wire traversing, setting the traverse width and spacing at will | |
| Core wire bobbin | Φ300mm × 280mm | Φ400mm × 300mm |
| Take up bobbin | Φ400mm × 300mm | Φ500mm × 300mm |
Machine Picture:
Contact us for design assistance, free quote, and expert advice today.
Your inquiry will be replied within 24 working hours, and we respect your privacy.
